When you walk into a room with newly hung drywall in Taylorsville, Utah, it is normal to wonder how long it will take before the surface is ready for paint. Homeowners who are tackling a remodel in Taylorsville experience very specific climate conditions. Between the dry summer heat and the freezing winter inversions, the drying time for joint compound matters a lot. Sunrise Drywall Co tells customers to map out a drywall finishing project carefully from start to finish to avoid common mistakes.
Setting a Realistic Timeline
Drywall finishing is not a fast job, and mud needs adequate time to dry properly between coats. If a contractor rushes the process, the walls will experience shrinkage, cracking, and a lot of frustration later on.
- Hanging and taping usually takes 1 to 2 days depending on the room size.
- Applying three separate mud coats takes about 3 to 5 days because of drying times.
- Sanding and final touch-ups need another full day.
Homeowners must factor in an extra day or two if they are dealing with older lath-and-plaster transition areas typical in some of the mid-century neighborhoods near Redwood Road.
What to Expect While We Are Working
Dust is a major factor during any drywall installation or drywall repair project. Even with the best dust-collection sanders, fine gypsum dust has a way of finding every nook and cranny. Sunrise Drywall Co seals off the work area with plastic barriers, but residents should still pack up electronics and cover furniture before Drywall Contractor work begins.
Homeowners will see crews applying mud, letting it dry, sanding it down, and repeating the process. The process looks tedious because it is. That second coat and third coat are what separate a wavy amateur wall from a flat, paint-ready surface that looks professional under harsh lighting.
How to Prep Your Space
Homeowners should not wait until the morning Sunrise Drywall Co shows up to clear out the room. All furniture must be moved, wall art pulled down, and loose area rugs rolled up. When there is clear floor space, Drywall Contractors work much faster and achieve a cleaner job.
HVAC vents in the work zone must be covered so dust does not get sucked into the furnace filter and blown all over the rest of the house. Sunrise Drywall Co also needs a steady indoor temperature, so residents should try to keep the thermostat at a reasonable level while the joint compound cures.
Questions to Ask Before You Sign
Before any homeowner hands over a deposit to a Drywall Contractor, everyone needs to be on the same page about a few key details:
- Are you licensed and insured in Utah?
- Do you include surface cleanup and dust containment in your bid?
- What level of finish are we quoting for these walls?
- Who supplies the materials?
Asking these questions up front keeps surprises to a minimum. For homes and businesses in Taylorsville, Sunrise Drywall Co provides Drywall Contractor services.